Are your Pipe Repair services available in Hurst?

Yes, Masters Plumbing Service provides round-the-clock Pipe Repair services directly in Hurst, TX.

How much does emergency service cost in Hurst?

We offer upfront, transparent pricing with no hidden fees for all service calls in Hurst.

🔧 Copper · PEX · Galvanized · PVC

Pipe Repair in Hurst, TX — Located Precisely, Fixed Permanently

Name: Masters Plumbing Service
Telephone: +1-855-718-1500
Price range: $$
Rating: 4.9

Pipe failures range from a slow pinhole leak weeping inside a wall to a full main line rupture. Locating the failure precisely — before opening drywall or digging — is the skill that separates a clean, affordable repair from an expensive and destructive guessing operation. Masters Plumbing Service's pipe technicians in Hurst, TX use acoustic listening devices and thermal imaging cameras to find the leak first, then open only what needs to be opened.

📞 Call +1-855-718-1500 — Same-Day Service

Acoustic & Thermal Leak Location All Pipe Materials Press-Fit & Sweat Capable Licensed in TX

Licensed Pipe Repair service in Hurst, TX - Masters Plumbing Service

Our Capabilities

4 Things That Define Our Pipe Repair Service in Hurst, TX

The biggest cost variable in pipe repair isn't parts — it's how much structure gets opened to find and access the failure. Precise pre-repair location tools reduce that cost significantly.

🔊

Acoustic Leak Detection

Pressurized water escaping a pipe creates a characteristic acoustic signature. Our listening devices amplify ground and structure-borne sound to pinpoint a leak location within inches — through concrete slabs, behind drywall, or under flooring. This means we open only the section of wall, floor, or slab directly over the failure.

🌡️

Thermal Camera Scanning

We use thermal imaging as a complement to acoustic detection — particularly useful for slab leaks and leaks inside insulated wall cavities where sound transmission is reduced.

🛠️

All Pipe Materials & Joining Methods

Our techs are proficient in copper sweating (soldering), press-fit connections (ProPress system), CPVC solvent welding, PEX crimp and expansion fitting installation, threaded galvanized repair, and ABS/PVC drain line work. We match the repair method and material to the existing pipe system rather than forcing incompatible transitions.

🔒

Pressure-Tested Before We Leave

Drain line repairs are water-tested by running fixtures through the repaired section and visually confirming no seepage at the repair joint and downstream.

Our Pipe Repair Services

What We Fix — Pipe by Pipe, Material by Material

Pipe failures have different causes depending on material type, age, water chemistry, and installation history. Here's how we address each category.

Copper

Copper Pipe Repair & Repipe

Pitting corrosion in copper is sometimes systemic rather than localized — a single pinhole is often the first of several to appear. When the camera or pressure test finds multiple deteriorated sections, we give you an honest assessment of whether targeted repair or full copper repipe is the better long-term answer.

Galvanized

Galvanized Pipe Replacement

We replace galvanized supply lines with copper or PEX — either as targeted section replacement at active failure points or as a full-house repipe project. We connect the new material to existing fittings using dielectric unions where code requires to prevent galvanic corrosion at copper-to-galvanized transitions.

PEX

PEX Pipe Repair & Extension

PEX is also the material of choice for extending or reconfiguring supply runs during remodel work. Its flexibility reduces fitting count and eliminates the need for torch work inside walls.

Burst Pipes

Burst & Freeze-Damaged Pipe Repair

A burst pipe from freezing or sudden pressure surge requires immediate water shutoff and precise repair. We locate the failure, determine whether it's a single failure point or multiple freeze-damaged sections, and repair with a method appropriate to the pipe material — press-fit coupling for copper, expansion coupling for PEX-A, or a mechanical repair coupling for emergency situations.

Slab Leaks

Under-Slab Pipe Leak Repair

Supply line leaks under a concrete slab are identified by acoustic detection and confirmed by thermal imaging. Once located, we evaluate three repair options: direct-access repair (jackhammering to the pipe, repairing the section, and patching the slab); rerouting the line through the wall framing above slab to bypass the failed underground run; or epoxy pipe lining for older copper systems with systemic pinhole corrosion.

Full Repipe

Whole-House Repipe Service

When galvanized supply lines are at end of life or polybutylene pipe (recalled for chronic failure) is in the home, a full repipe with PEX or copper is the permanent solution. We run new supply lines through the structure, transition all fixture connections, pressure test the entire new system, and patch access points in walls and ceilings.

📞 Call +1-855-718-1500 — Get a Diagnosis Today

Our Process

From Leak to Fixed Pipe — 4 Precise Steps

We don't open walls at random. Acoustic and thermal detection tools tell us exactly where to cut before we pick up a saw.

Call & Describe — We Shut the Water If Needed

Active leak? Our dispatcher walks you through shutting off the main supply valve while we drive to you. Describing what you see — water stain on a ceiling, drop in water pressure, wet flooring — helps us arrive with the right detection tools loaded.

Pressure Test & Acoustic / Thermal Detection

We pressurize the supply system and monitor for pressure drop to confirm an active leak. Then acoustic listening devices and the thermal camera locate the failure to within a small area — telling us which section of wall, floor, or slab to open.

Flat-Rate Quote & Minimal Access Opening

For slab leaks, we present repair, reroute, and lining options with pricing so you can make an informed choice before any concrete is cut.

Repair & Pressure Test — Then You're Done

You receive a written summary of what failed, what we installed, and the warranty terms before we leave.

Customer Reviews

What Hurst Customers Say About Our Pipe Work

★★★★★

My older home had a copper supply line fail inside an exterior wall. The thermal camera showed the wet zone through the drywall without any cutting. They opened a 10-inch section right at the pinhole, put in a press-fit repair coupling — no torch in my wall — pressure tested, and patched the drywall themselves. Two hours total.

— N. Bergman, Hurst

★★★★★

Had an under-slab leak diagnosed by Masters Plumbing Service with acoustic equipment. They found the leak at 6 feet from the wall — a single copper elbow that had developed a pinhole. Presented three options: direct slab access, reroute through the wall framing above, or copper lining. I chose the reroute — they ran a new PEX line through the crawl space and connected at both ends without touching the slab. Pressure tested, verified no remaining drop. No jackhammering at all.

— O. & R. Adeyemi, Hurst, TX

★★★★★

Pipe burst in a rental property at 2 AM — Masters Plumbing Service's emergency line answered immediately, talked my tenant through the main shutoff, and had a tech there in 45 minutes. Freeze crack in a PEX line in an exterior wall. Repair and insulation wrap done in under two hours. Detailed receipt for insurance documentation. Exactly what I needed as a landlord dealing with a crisis remotely.

— F. Okoro, Hurst, TX

Trusted Pipe Repair service in Hurst, TX - Masters Plumbing Service

Common Questions

Pipe Repair Questions We Answer Every Day

A slow pinhole leak inside a wall can run for months before surface damage appears. By the time you see a stain, the moisture intrusion is typically already significant. If your meter shows movement with everything off, call us — we can pressure-test and locate it before it becomes a major remediation project.

In most cases, the pipe itself needs to be physically accessed to make a durable repair — but the amount of wall we open depends entirely on how precisely we can locate the failure first. With acoustic detection and thermal imaging, we typically open a single, small access point rather than a wide section of wall.

A slab leak is a supply line or drain line failure in a pipe that runs through or under the concrete foundation slab. Supply line slab leaks are the more urgent scenario — pressurized water escaping under the slab saturates the subgrade, can undermine the foundation, and drives significant water bills.

Galvanized pipe corrodes from the interior outward — by the time one section fails, the rest of the pipe is in varying stages of the same process. A localized repair buys time, but another section typically fails within 1–3 years if the system is at end of life. The honest answer is: it depends on how far along the corrosion is and how many sections are already narrowed or showing surface rust.

We don't rush pressure testing at the end. That's the step that confirms the repair is actually complete, and it takes the time it takes.

For slab access openings, we clean up concrete debris, complete the pipe repair, and patch the concrete. Tile or flooring restoration over a slab patch is normally a separate trade.

Pipe Repair in Hurst, TX — Located Precisely, Fixed Permanently